Tool Steel Alloys   BASIC GROUPS OF TOOL STEELS AISI TYPE DESCRIPTION   WATER HARDEN  ING CARBON   Wl All of the water-hardening grades  can be furnished with 1.00/1.10  pet carbon for general tool die  applications; with .70/.90 pet carbon for shock applications; with .90/1.00 pet carbon for cold-heading applications; or with 1.10/1.30 pet carbon for maximum abrasion resistance.   OIL HARDEN ING 01 A versatile safe-hardening steel for general purpose tools and dies. Has good edge holding ability at high hardness levels. 06 This grade has the highest machinability rating of any tool steel. It is good for general purpose applications particularly those requiring resistance to sliding wear rather than maintaining a cutting edge. COLD WORK AIR  HARDEN ING A2 An extremely safe-hardening steel with low distortion and high abrasion resistance. A6 A low-alloy air-hardening steel. The low austenitizing temperature offers safe, economical heat treatment. D2 A high-carbon, high-chromium grade for maximum service and minimum dimensional change in heat treatment. SHOCK RESISTING S7 A general purpose cold work grade with high shock resistance and strength. Air-hardening reduces quenching hazards, and offers good resistance to distortion during heat treatment. Also used for injection and compression molding of plastics. HOT WORK H13 Chrome-moly-high vanadium. For die-casting dies and extrusion tooling. HIGH SPEED M2 This is the most widely used type of high speed steel. Tl A tungsten-base, high speed steel. T-1 can be used where modern heat treatment equipment is not available. It is often used for roughing cuts. PLASTIC MOLD 420 A machined-cavity mold steel for injection or compression operations subject to corrosive media. P20 A prehardened (Brinell 300) medium alloy machined-cavity mold steel. Expressly for deep cavities in large cross sections.     4101 West Marginal Way SW #B9 * SEATTLE * WA * 98106 - 1270 (206) 382 - 0305 PHONE * TOLL FREE (800) 785 - 9778 * (206) 382 -9204 FAX